The use of programmable touch screen constant temperature and humidity box: Programmable touch screen constant temperature and humidity chamber temperature adjustment is through the built-in temperature sensor of the cabinet, collecting data, adjusting by temperature controller (micro information processor), turning on the air heating unit to increase the temperature or adjusting the cooling solenoid valve to reduce the box. Body temperature to achieve the desired temperature for control. The constant temperature and humidity chamber humidity adjustment is carried out by the built-in temperature sensor, collecting data, adjusting by the humidity controller (micro information processor), connecting the water tank heating element, and increasing the humidity in the tank or adjusting the cooling by evaporating the water in the water tank. Solenoid valves are used to achieve dehumidification to achieve the desired humidity. Â Programmable touch screen constant temperature and humidity chamber is suitable for parts and materials of electronic and electrical, aerospace, automobile and motorcycle, scientific research units, universities, various electronic components and other related products in high temperature, low temperature, constant temperature and hot and humid environment. Adaptability tests during storage and use to test their performance indicators. Although it is easy to operate and use, it can easily cause accidents if it is operated incorrectly, and shorten the service life of the high-programmable constant temperature and humidity chamber to reduce the performance of the programmable constant temperature and humidity chamber. Shine Skin Pumpkin Seed Kernels Shine Skin Pumpkin Seed Kernels,Pumpkin Kernel,Raw Pumpkin Seeds,Peeled Pumpkin Seed Inner Mongolia Xuanda Food Co., Ltd. , https://www.xuandagroup.com
The programmable touch screen constant temperature and humidity box operation needs to pay attention to the following points:
1. The stacking amount of the tested items cannot affect the circulation of the programmable constant temperature and humidity chamber , otherwise the performance of the equipment may be affected.
2. It is absolutely forbidden to heat or test explosive, flammable and highly corrosive substances to avoid unnecessary losses.
3. When using the programmable constant temperature and humidity chamber for testing, the door must be closed and closed to avoid temperature and humidity leakage and fail to reach the set range.
4. If it is running below 0 °C, if there is no special need, it is recommended that you do not open the door. Because when the low temperature test is done, opening the door is easy to cause the internal evaporator and other parts to cause ice sealing. The lower the temperature, the more serious the phenomenon. If the experiment requires you to open, Zui should try to shorten the opening time.