Measures to Prevent Snow Disaster in Sunlight Greenhouse

1. Qinggou Drainage: In order to remove the snow in time, it is best to remove the snow from both sides of the shed and sweep it from the membrane to prevent the snow from melting into the shed.

2, to improve lighting: during the day to be as soon as possible to uncover the curtain, shade nets and other coverings, increase lighting, but pay attention to the method of uncovering the cover when covering the cover, not a one-time full exposure to prevent the snow from turning fine, Too much light caused by severe crop water loss caused acute flash seedlings to wither.

3, fertilizer management: thawing after the snow, the plants resumed growth, the weather was clear at noon, depending on the growth of vegetables can be followed by application of faecal water to promote growth.

4. Warmer and warmer: Temporary warming measures are adopted to reasonably regulate the temperature in the greenhouse. Warming and freezing can be used to buckle small sheds in large greenhouses, arching with thin bamboo arches, covering with double-layer membranes, or covering shading nets on small arched ceiling membranes. The conditions are also suitable for hanging under large greenhouse membranes. Two-layer film

5. Repair of greenhouses: Regardless of whether the large or medium-sized sheds in the snowstorm are collapsed or half-fallen or not, we must seize the time to repair and reinforce the skeletons and sheds, add wood support in the sheds, reinforce the pillars in the shed, and reinforce the lamination line. The bottom membrane of the greenhouse should be soiled with mud, membrane membrane holes should be filled with tape, and small holes with micro-films can be dampened with water.

Laser Distance Meter

Laser distance measure is a very convenient tool for various types of applications in industries, construction and house decoration. Laser distance meter is a very useful device which gives accurate measurement of distance, area and volume especially in large areas such as rooms, apartments, buildings, real estates, factories, warehouses, infrastructures, gardens, roads, and many other applications requiring accurate results for distance , area and volume measurement.

Trade your heavy tape measure for laser rangefinder, which let you simply take measurements with one hand. No matter your job, the laser rangefinder will help you measure much farther, with greater accuracy and in more situations, saving you money and time.

Specification:

Product Model:

JX40

Accuracy:

±1.5mm (0.06 inch)

Measuring Unit:

metre/inch/feet

Measuring Range:

0.03~40m (0.01 to 131 ft)

Measuring Time:

0.1~4 seconds

Laser Class:

Class II

Laser Type:

635nm, <1mW

Waterproof & Dustproof :

IP54

Auto Laser Off:

60 seconds

Automatic Power-off:

480 seconds(8 minutes)

Lighting:

white LED

Datum Option:

Can choose Front edge or end piece edge as datum

Battery Status:

Y

Signal Strength Display:

Y

LCD display:

2 inch large screen

Display illumination and multi-line display:

Max 2 displays

Data Memory:

Y (allow 20 values)

Backlight display:

Y

Continuous Measurement:

Y

Min/max Measurement:

Y

Addition/Subtraction(Distance/Area/Volume):

Y

Area/Volume/Pythagoras Measurement:

Y

Battery Type:

AAA alkaline battery(2*1.5v )

Weight:

about 80g

Dimensions(L*W*H):

4*2*11.5cm

Auto correction and error report technology:

Y

Operating Temperature:

0-40 ℃(32-104 ℉ )

Storage Temperature:

-20~60 ℃ (-4~140 ℉)

Laser Distance Meter,Laser Distance Measure,Laser Rangefinder,Laser Distance Gauge

Chengdu JRT Meter Technology Co., Ltd , https://www.jrt-measure.com