Ice machine instruction manual

The ice machine is one of the professional sales products of Bayu. With many years of technical and after-sales experience, the following Baal technicians will introduce you to the instruction manual of the ice machine.

Instructions for use of the ice machine :

1. Insert the ice machine power cord into the three-phase socket with grounding, the power indicator light starts to flash at intervals, and the ice machine enters the standby state;

2. Open the front cover, take out the ice bar, and manually add water to the inner tank of the ice machine. The water level should not exceed the highest water mark line on the inner wall of the liner.

3. Put the ice bar in the original position and cover the front upper cover; you can press the button to make ice.

4. Depending on the ambient temperature and the choice of ice making mode, each ice making time is 6 to 15 minutes, and the ice machine should not be used outdoors or in direct sunlight.

5. After the ice machine has been working for a period of time, there may be water shortage and water shortage in the machine. The water shortage indicator "Add Waster" will light up. When there is water shortage, please press the "Power" button to stop the ice machine. After adding water to the machine, press the “Power” button again and the machine will re-enter the system.

6. After the ice bar is full, the ice making machine will stop working automatically, and the “Ice” indicator will light up.

7. When the ice machine is not used for a long time, please drain the water inside the machine. Before draining, place a water-receiving container under the drain hole on the side of the ice machine, then unscrew the drain nut and open the ice machine. Box; open the ice machine packaging box, take away the packaging foam and packaging bags, check whether the instructions in the ice machine, ice spoon, ice bar accessories are complete, if there is a shortage, please contact the seller in time.

8. Clean the ice machine once with tap water and dry it with a soft cloth; place the ice machine in a horizontal place, but not in a place exposed to direct sunlight, or near a heat source (such as a heating furnace, On the side of the stove or refrigerator heat sink, make sure that the ice vents of the ice machine do not block the objects. No obstructions are allowed within 15cm, because no ventilation will seriously damage the equipment; before starting the ice machine, it is best Place the ice machine for 1 hour. The maintenance and cleaning ice machine is cleaned before leaving the factory, but it is recommended to clean it again before use.

The above is a brief introduction to the instruction manual of the ice machine. If you want to know more, please see: Ice Machine

In 2007, Shanghai Bayu ( ) Industrial Co., Ltd. established an offline supply system for laboratory instruments, MRO industrial products, etc. In 2009, it officially launched an online procurement operation platform.

Plant Protein

Plant-based protein powders are our hot selling products which can be widely used in sports nutrition and health&wellness fields. Among protein powder from different plant sources, rice protein, pea protein, sunflower seeds protein, pumpkin seeds protein is suitable for making protein bars, protein shakes. Take plant protein as subsititute of animal protein could reduce the risk of getting heart diseases, plant protein contain more fiber and do not contain less healthy compounds found in meat including saturated fat and cholesterol, plant protien are safe and vegan friendly choice.

Plant Protein,Protein Powder,Plant-Based Protein,Rice Protein

YT(Xi'an) Biochem Co., Ltd. , https://www.ytnutra.com