Pilling reference formula: Cooling Agent, is a general term for all the chemicals that can produce cooling effects and are not strong. The most common Cooling Agent is menthol (especially L-menthol), but it should not be used in large quantities due to its strong odor and strong irritation to the skin, mucous tissue, and eyes. Therefore, many scientists have synthesized and extracted a new generation of cooling agent. WS-23,flavor,Menthol,WS-5,Koolada,WS-12 Xi'an Double H Health Technology Co., Ltd , https://www.xadoubleh.com
1. The medicine is dried and processed into a powder, and the fineness thereof is 80-100 mesh, and the medicine such as rehmannia is repeatedly twisted several times to reach the slurry by the method of the meat grinder.
2, medicine powder, rice soup (rice simmered into porridge, remove the rice viscous liquid is rice soup), honey, a small amount of dextrin (the ratio of medicine and honey is 10:1, rice soup amount), stir into a dough. Special attention: the viscosity of the powder should be moderate, not too soft or too hard to stir evenly and not sticky.
3, dextrin must be added with water into a paste, must be stirred with a spoon when tanning.
4. It is strictly forbidden to add cooking oil to the shot shaft during use, otherwise the stick stick will not fall off easily.
Instructions:
1. Before starting the machine, remove the upper cover (as shown), add a few drops of anhydrous cooking oil to each oil hole, and wash the roller and the contact with the drug with medical alcohol to remove oil and disinfect.
2. After the medicine is processed, the powder is dried and powdered into 80-200 mesh. The crushing equipment matched with the pelletizing machine is the flow mill of the factory or the 200-500 g rocking mill.
3, honey according to the nature of the prescription Chinese medicine powder, refined into a suitable degree of refined honey.
4, the pellets are also known as medicines, the mixture of the uniform powder and the appropriate refined honey into a soft and hard, plastic large pellets.
5. Pelletizing: The mixture is kneaded into a cylindrical shape and vertically put into a pressing cake tank, and the cake is pressed, and the cake-like medicine is put into the trough. The formed strips are taken out, and the medicine strips are placed one by one in the pellet-making tank, and the pellets are made into pellets.
6. Coating: After the pills are made, put them into a coating machine, and put them into a coating body to form various outer garments.
7. Polishing: After the pellets are made, put them into the coating machine and roll continuously. The rolling time is long and the surface is smoother.
8. Drying: After the pellets are made, put them into the coating machine, and turn on the heating power supply and the outer garment to dry. (It can also be dried with a hair dryer or dried in a ventilated place)
9. Water pill: Put the medicine surface (0.1kg) into the water pill coating device, gradually put it into the rice soup, form the granules, and then spray the cooked water at intervals, and gradually form the pill.
10. When the coating device is not in use, screw the black bag screw on the clutch close to the coating device and unscrew it from the coating device. (If used again, after pressing the coating device, the screw must be tightened in the coating device. Cannot be used if it cannot be pulled out)
11. After use, remove the roller according to the diagram to clean the roller, and put it back. (as the picture shows)
12. Keep the inside of the equipment clean and dry.
The basic steps of the preparation method of the honey pill are as follows: multi-drug → slicing → pelleting → packaging → storage.
1. Mix the refined refining honey and powder according to the ratio (the ratio of powder to refined honey is generally 1:1 or 1:5, which is less than 1:1, depending on the nature of the drug and the season. Chinese herbal medicines containing sugars and oils contain less honey. The amount of honey containing more cellulose and loose texture is more. The amount of honey used in summer is small, and the amount of honey used in winter is much. Evenly blended to make dough for imaging dough. When the medicine is combined, the honey is usually added hot (such as containing gum, resin or volatile ingredients need to be slightly cold after the honey is added and mixed), fully and evenly, so that it is moisturized both inside and outside, the color is consistent, the hardness is moderate, Can be molded at will.
2. Place the prepared dough-like soft material for a certain period of time, so that the medicine and the honey ingredients are mixed and moisturized, and after a certain viscosity is generated, the automatic pill mechanism can be used to make the pills uniform in size, and the particles are smooth and full. (Small pelletizers are available for small quantities.)
3. When making pills, in order to avoid sticking hands and sticking utensils, an appropriate amount of lubricant can be used during operation. The lubricant can be made by glycerin or sesame oil (peanut oil), and the beeswax is heated and melted in a certain proportion. Summer beeswax can be added a little more.
4, packaging and storage: made of honey pills, can be wrapped in wax paper, cellophane, plastic bags, wax shells stored in a cool dry place. (Note: Do not put the prepared pills in the sun.)