In addition, during the “Three Autumns†season, the author discovered that there were fertilizer dealers asking the workers to pick up sticks to hit the fertilizer bags. When they asked the reason, they knew that the fertilizer was piled up for a long time and had to be broken. There are feedback from dealers that it is time-consuming and laborious to knock a few sticks every year because of agglomerating fertilizers. If it is not beaten, the fertilizer will not be easy to sell because the farmers are afraid that it will be a fake fertilizer. In general, the main raw materials for compound (mixed) fertilizer production are urea, ammonium chloride, ammonium nitrate, ammonium sulfate, diammonium phosphate, monoammonium phosphate, superphosphate, potassium chloride, and potassium sulfate. These fertilizers are easily dissolved and compound (mixed) fertilizers made from these readily soluble fertilizers tend to agglomerate during storage and transportation. To prevent the agglomeration of fertilizers, what should manufacturers do? Fertilizer agglomeration seriously affects the position of the product in the minds of dealers and farmers. Manufacturers improve the fertilizer manufacturing process equipment, agglomeration phenomenon will be reduced a lot. The main measures to prevent caking are the following: 1. Reducing the moisture content of the fertilizer and the temperature of the packaging, dehumidifying the unit by heating and dehumidifying the dryer, and installing air-conditioning, etc., such that the fertilizer moisture is controlled below 0.6%, the time for reducing the temperature of the fertilizer is prolonged, and the packaging temperature is lowered; 2. Add anti-caking agent to raw materials to reduce physical and chemical reactions between particles; 3. Through the transformation of the screening system to further improve the uniformity of fertilizer particles; 4. Reduce the height of the palletization of fertilizers and reduce the storage pressure. Prevent fertilizer agglomeration, dealers how to do? 1. Reducing the temperature and humidity of the warehouse, storing the fertilizer in a cool and dry place, ensuring that the roof is not leaking rain and water in the ground, the warehouse is equipped with exhaust fans, and if necessary, cooling and dehumidification are performed; 2. Fertilizers are frequently turned over after storage for a period of time, especially fertilizers with high nutrient content. They are more likely to agglomerate when they are stored for a long time, and more attention should be paid to frequent turnover. 3. Fertilizers that are prone to chemical reactions are stacked separately to prevent agglomeration; 4. Decrease the height of fertilizer pallets and reduce the pressure between particles; 5. Avoid blind orders, reduce inventory pressure, prevent fertilizer accumulation time is too long caking; 6. Select the regular manufacturer's products to prevent poor granulation and uneven particle formation. Ningbo Staneex Imp. & Exp. Co., Ltd. , https://www.staneex.com