The food superfine pulverizer consists of three parts: the main machine, the auxiliary machine and the electric control box. It has various properties such as air-selection, no sieve, no net, uniform particle size, etc. The production process is continuous. The food superfine pulverizer has reached the international advanced level and is widely used in the crushing of materials in the pharmaceutical, chemical, food and other industries. The food superfine pulverizer material enters the pulverization chamber from the hopper through the screw conveyor, and is sheared and pulverized by the high-speed rotating blade. The food superfine pulverizer transports the material into the cyclone separator by the method of negative pressure air transportation, bag type dust collector, The discharged material meets the requirements of the product.

The food superfine pulverizer has a crushing main machine, a cyclone separator, a pulse dust box and the like. The material enters the crushing chamber from the feeding hopper, and is pulverized by the high-speed rotating hammer. The pulverizing fineness can adjust the distance between the classifying knife and the grading plate to achieve the required fineness, and the pulverized material enters through the centrifugal force of the rotor and the effect of the induced draft fan. The cyclone sharer is then discharged through the fan, and the dust enters the pulse dust box and is filtered through the filter cartridge for recycling. The food superfine pulverizer is designed according to the "GMP" standard. The whole superfine pulverizer is made of 304 stainless steel material, and the pulverization process is free of dust.

Food superfine pulverizer structure and working principle:

The main shaft of the food superfine pulverizer is equipped with a movable gear disc. The movable sprocket wheel is equipped with three movable teeth, a fixed toothed disc on the door, and two fixed ring gears with steel teeth on the fixed sprocket wheel. The movable teeth on the movable tooth plate of the food superfine pulverizer are staggered with the fixed ring gear. Food Superfine Grinder When the spindle runs at high speed, the movable sprocket also runs at the same time, and the material is thrown into the gap of the hoe. The pulverization is obtained under the combined effects of mutual impact, shearing, and friction between the material and the teeth or materials. The pulverized material automatically enters the predation bag by the action of rotating centrifugal force, and the dust enters the secondary bag to be filtered and recovered under the internal pressure. After the sieve is neglected by the screen, it is discharged into the collection bag from the crushing chamber, and the coarse material continues to be crushed. The machine is designed according to the “GMP” standard. The food superfine crusher is all made of stainless steel, and there is no dust flying during the production process. Improve the utilization rate of materials and reduce the cost of enterprises. The food superfine pulverizers are all equipped with self-water cooling system, which can continuously cool and cool the machine to improve the working time of the pulverizer. It has reached the international advanced level.

Food superfine pulverizer operating procedures:

a, preparation before starting:

1. Check the integrity of the electrical appliance. There is no iron filings and other debris in the main cavity;

2. Wiring: Connect four-phase line, one of which has three zero-line and zero-line (yellow line is yellow line or yellow line);

3. Check the screws: Check if all the fastening screws of the machine are tightened;

4. Check if the upper and lower pulleys are parallel in the same plane and whether the belt is tensioned;

5. There should be no jamming when turning the spindle by hand, and the spindle runs freely;

b, the operation sequence:

1. Power: Turn on the power switch, the indicator light is red;

2. Spindle rotation direction: Touch the remote control for 1-2 seconds to make the spindle motor running direction coincide with the direction of the arrow shown on the protective cover (counterclockwise direction);

3. Turn on the pulverizer. After the rotation speed is normal, the pulverized material can be added, the material is added to the funnel, and the funnel gate is opened to a moderate degree;

4. Turn off the power after use, the machine must be cleaned after each use to prevent cross-contamination of materials.

c, food superfine pulverizer notes:

1. In the operation, it is necessary to carry out intensive work, gently take it lightly, try to reduce the dust flying, and pay attention to remove the foreign matter in the material;

2. The material should be inspected before crushing to prevent foreign matter from entering;

3, the pulverizer should start at no load, after starting smoothly, then slowly and evenly feed, not too fast feeding, in order to prevent the pulverizer overload causing plugging machine, crash;

4. If the machine is found to be faulty, it must be shut down, the power supply must be turned off, and the maintenance personnel should be notified to come to the repair. It is not allowed to repair it privately to prevent accidents;

5. Regularly lubricate the machine;

6. After each use, the power must be turned off before cleaning.

The food superfine pulverizer is a stainless steel pulverizer. The food superfine pulverizer is suitable for the pharmaceutical, chemical, pesticide, food and grain industries. It pulverizes the dry and brittle materials, selects the corresponding product model according to the size of the material, and has a low melting point. For materials with high viscosity, you can choose the trial first.

The food superfine pulverizer is made of stainless steel due to the contact between the food superfine pulverizer and the pulverized material. It has good corrosion resistance. At present, the frame is completely closed around, which is easy to clean. The food superfine pulverizer casing The inner wall is machined to achieve a smooth and smooth surface, which changes the original inner wall roughness and powder accumulation, making the production of medicines and foods more in line with the "GMP" standard. The food superfine pulverizer has simple structure, strong and durable, high output, stable operation, low noise and long working time.