How to manage early summer grapes

How to manage early summer grapes

[Font:] [May 22, 2021] [Editor in charge: Weiwei] [Reading: 86 times]

In early summer, the promoted cultivation grapes are in the young fruit stage, the rain-proof cultivation grapes will enter the initial flowering stage, and the open-field cultivation grapes are still in the inflorescence differentiation stage. The current grape management should pay attention to the following matters:

1. Promote the cultivation of grapes 1. Strengthen the ventilation of the greenhouse and control the temperature and humidity in the greenhouse. The shed door should be opened around noon and the skirt should be lifted to reduce the humidity and the temperature on cloudy days. Due to the large changes in temperature at present, heat preservation should be done at night.

2. Fixed shoots and fixed yield: According to the variety, tree vigor and yield requirements, generally 2200-2500 shoots per mu are reserved. The yield per mu is about 750-1000 kg.

3. Top dressing: Top dressing and watering quickly after the fruit is set. Keep the soil moist during the young fruit swelling period.

4. Continue to handle the vice shoots and pay attention to the prevention and treatment of powdery mildew.

2. Cultivation of grapes in open field and sheltered from rain 1. Tree body management: main shoot topping: 5-7 days before the first flowering for the vigorous trees, and 5-7 days before the first flowering for the trees with moderate or weak vigor, and 5 for the first inflorescence. -7 leaves topping. Auxiliary shoot treatment: erase below the inflorescence, treat the single leaves above the inflorescence after extinction, leave 1~2 auxiliary shoots in the topping mouth. Whole ear: the whole ear takes about a week before. After the whole ear, Kyoho and other varieties generally retain 13-15 branch ears, and Xia Hei can only leave 3-5 cm from the tip of the ear.

2. Soil moisture and fertilizer management: use fine weather to step up site preparation and weeding, clean up and deepen the trench system, and prevent heavy rain and water accumulation. If the soil in the field during the rapid growth of the new shoots is dry, water can be watered once; spray the excellent boron 1000 times before the flower to promote fruit setting.

3. Prevention and control of pests and diseases Before and after flowering, focus on the prevention and control of pests and diseases, mainly gray mold. Method: 50% boscalid water dispersible granules (Kaiser) 1500-2000 times or 40% pyrimethanil suspension (Scarlet) 1000-1500 times can be used, and it can be mixed with imidacloprid or pyrethroids for control. Insect agent also treats piercing and sucking mouthparts pests such as A. lucorum and aphids.

Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone

Reagent Strips For Urinalysis

Urinalysis test strips refer to test strips that test for bilirubin, urobilinogen, ketone bodies, ascorbic acid, glucose, protein (albumin), blood cells, PH, etc. in urine.
Detection principle
1. pH: The pH value in the range of 5-9 is measured by the pH indicator, and the pH value of the fresh urine of a normal person is between 5-7.
2. Nitrite: The reaction is based on the reduction of nitrate to nitrite by Gram-positive bacteria in the urine. The nitrite reacts with p-aminobenzenesulfonic acid to form diazonium compounds, which are then combined with N-(1-naphthalene) )-3 aminopropanesulfonate combined with a pink color.
3. Glucose: According to the reaction principle of glucose oxidase, glucose oxidase specifically oxidizes glucose to generate glucuronic acid and hydrogen peroxide. Under the action of hydrogen peroxide, hydrogen peroxide oxidizes the indicator and turns color. .
Classification
Urinalysis test strips are divided into visual series and machine series. The visual inspection series is divided into several models according to different inspection items; the machine inspection series is divided into several models according to different applicable instruments.
1. Classification by measurement method
1) Visual inspection series
When observing the result, compare the color with the standard color code within the time specified on the color code, judge and read the result.
2) Machine test series.
For instrument operation, refer to the instruction manual of the Urine Analyzer used.
2. According to the number of measurement items
There are single-item, 2-item, 4-item and multiple test strips. Currently, 10-item or 11-item multiple test strips are most commonly used in hospitals.
3. Classification by structure
Urinalysis test strips with single-layer membrane structure and multi-layer membrane structure.

Urine Reagent Strips,Urine Test Strip,Urine Sugar Strip Test,Visual Urine Analysis Strips

Jilin Sinoscience Technology Co. LTD , https://www.contoryinstruments.com