Asahi Buns are made up of five parts: conveying system, feeding system, machine head, forming plate and conveyor belt. When the machine is working, the dough feeder sends the noodles to the exit of the machine head to form a noodle column containing the stuffing, and then the face column is squeezed into a uniform size bun by the forming block in the forming plate. Bun machine operation method: 1. Install the conveyor belt. The conveyor belt is removed before packing. The conveyor belt is fixed by four bolts. Just align the bolts with the four holes on the machine. Check the tightness of the conveyor belt after installation. Don't be too tight or too loose. 2. Open the back cover of the machine and take out the grounding protection wire. Bundle a metal rod on the grounding protection line and put it on the ground for safety protection. 3. The main power switch of the machine is on the control box on the side of the machine. The green button is on, the red button is off, and the main power switch is turned on. 4, first open the forming plate switch, then the dough mixer switch and the filling machine switch, the corresponding surface and the filling adjustable controller above the feeding surface and the filling filling switch are used to control the surface and the filling. The size, from small to large height surface and the adjustable controller of the stuffing, let it idling to see if the parts are normal, there is no shaking or abnormal sound, and the adjustable controller for the face and stuffing is closed after the inspection is completed. The smallest. 5. Open the forming disc cover and add some cooking oil on the contact surface between the forming blocks to ensure lubrication to reduce friction. 6. After the above work is done, wipe the machine clean. Bun machine cleaning and maintenance methods: 1. The machine must be based on the principle of three specializations: special person operation, special person maintenance, and special person cleaning. 2. After the end of the work, in the feeding system, the filling system and the detachable parts of the forming block should be cleaned. Do not use hard objects or hit during the disassembly and cleaning process. Be careful to handle it with care. 3, the cleaning of the molding block must not be scrubbed with steel brush or hard object. 4. After the molding block is cleaned, it should be placed in order, add a little cooking oil or edible grease in the forming block, and add some cooking oil to the transmission parts. 5. Add edible oil every three months in the cam groove. 6. Each part of the bearing should be removed and washed once every three months. 7, each part of the transmission parts must be added cooking oil. 8. The gears and chains between the motors must be greased once every six months. Our company's bun machine completely solves the problem that the effect of making bread is not as good as manual, and the size of the stuffing, the size of the steamed buns and the proportion of the toppings are freely adjustable. Buy bun machine suggested that you come to the factory for on-site inspection, we can give you a test machine on-site, or you can directly take you to the user of our bun machine to see the actual production. After you are optimistic, set the machine. Let you buy it with confidence and use it comfortably! Isoprene Gasket For Caps,Gasket for Medical Bag,Isoprene Rubber Gasket Suzhou CRH New Material Technology Co.,Ltd. , https://www.crh-health.com