First, the evolution of domestic orthopedic medical equipment development

The development of orthopedic medical devices in China is not long. The time is only about 20 years. The orthopaedic medical equipment market in the 1990s basically belongs to the buyer's market. Many orthopedic surgeons are looking for manufacturers to find some suitable products. In the 1990s, foreign capital gradually entered. At the same time, a number of local national enterprises were born. Orthopaedics mainly studies the anatomy, physiology and pathology of the musculoskeletal system. The treatment methods mainly include drugs, physical therapy and surgical treatment. Among the above three treatment methods, the treatment is more important, accounting for the largest proportion. According to the physical structure, medical devices can be divided into internal fixation and external fixation. The internal fixation called internal fixation mainly includes joints, bone plates, screws, etc. External fixation is a fixed method in vitro. Including external fixators, splints, bandages, gypsum, etc., the two methods are mainly based on internal fixation, and both methods are used to fix the fracture end and promote the formation of osteophytes as soon as possible.

Second, the concept of orthopedics and its academic classification

From a therapeutic point of division, orthopedic medical devices can be divided into categories trauma, spinal classes, class joint, ankle class. Trauma is the most common type, is the most basic, followed by a class spine, joint classes, now emerging out of a branch of the ankle, and now in some large hospitals more disaggregated, and some classes will be subdivided into cervical spine, Lumbar vertebrae and so on.

First wound type, wound type and wound into children, adults, wound type, wound type devices commonly include bone screws, external fixation and the like, internal fixation wound class can be subdivided into external fixation and intramedullary fixing, including external fixation plate, screws, intramedullary fixation mainly for external bone fracture of some of the intramedullary nail (nail), intramedullary, myeloid disorders are interlinked fixed many, many indications are two ways treatment, surgery may be selected according to the preferences of the extent and practices;

Followed by the spine class, the spine class can be divided into trauma and degenerative disease clinically. The trauma is mainly the external force such as car accident or high altitude fall fracture. The degenerative disease mainly refers to the daily lumbar disc herniation, including some Congenital malformations, tumors, internal fixation of the spine include screws and the anterior cervical plate, as well as some products for minimally invasive vertebral body formation;

Finally, the joints are mainly connective tissues composed of soft tissues and ligaments of the human body. The largest joints are mainly hip joints and knee joints. Others such as elbow joints have a small amount of surgery, and hips and knee joints are the main;

In addition, there are ankles, which are emerging disciplines in recent years. They were previously hand-foot surgery and are now listed separately as foot-and-stomach. In recent years, with the development of some medical device companies, some new products have been introduced. Before the doctors of the Foot and Foot Department did not have many products to use, basically the Kirschner wire and then the screws. The wounds were mainly external injuries. The orthopedics were mainly problems of degenerative diseases. They were not noticed before, but now the patient volume Much.

Third, the domestic orthopedic market overview

Orthopedic medical devices account for about 6% of the total medical devices . Orthopedic devices are also regarded as high-value consumables in the entire medical device industry , with high technical content. According to the research report, in the past few years, the market of orthopedic medical device industry has reached more than 20% in line with growth. By 2018, there will basically be a compound growth rate of 15%. The market size can reach 21 billion. The growth period is relatively large. Spinal class can reach more than 20%.

The whole market share of trauma is the largest, with 32%. The growth of the construction industry in the whole country is relatively slow, the control of drunk driving is becoming more and more strict, and the growth of trauma is relatively slow. As China enters the aging society, the growth of joints and spines is relatively high. Large, the average annual compound growth rate of joints in 2009-2015 can reach more than 20%. In 2015, the market share of joint implants was 4 billion yuan. Joint replacement is mainly mainly imported manufacturers, and domestic manufacturers are also Continuous improvement, technology is constantly catching up. Taking joint replacement technology as an example, the life expectancy in clinical use is about 15-20 years. There are some differences in technology and technology between domestic and foreign countries. Now, the distance is gradually narrowed. In addition, some foreign companies monopolize raw materials and form certain barrier.

10000Hz High Frequency LiDAR Module

10000 Hz is one of our 2021 new solutions products,which can be widely used in drone postioning, car anti-collision, intelligent traffic monitoring etc. with high accuracy. We support customized service of different frequency(100hz,200hz,300hz,400hz,1000hz,5000hz,10000hz etc.), you can choose the suitable design. And the LiDAR module is a small size with 43*35*21mm, customers can be integrated to their measure device easily. If you meed any documents(PDF files etc.) of JRT high frequency LiDAR distance sensor, please contact us now.

Some key features may help:
Accuracy: ±3~5cm(<50m) /±1%(>50m)
Range: 0.1-200m
Resolution: 1cm
Frequency: 100/200/400/1k/5k/10khz
Laser type: 905nm,Class I
Size: 43*35*21mm
Weight: 20g
Input voltage: 8-36V

10000Hz High Frequency LiDAR Module,LiDAR,High Frequency LiDAR Module,10000Hz LiDAR Module

Chengdu JRT Meter Technology Co., Ltd , https://www.accuracysensor.com