Wfj superfine pulverizer for the repair and maintenance of the process
Purple corn. Green outer leaves with a touch of lilac, ear grain is a black yo-yo, not if fruit corn sweet, but Q bomb chewiness, do not have a flavor.Sweet glutinous corn with a purple black, it is full of anthocyanins oh!Anthocyanins are water-soluble, so when boiled, the water will appear purple and black. It is a natural antioxidant that helps maintain good health.
Purple Glutinous Corn,Double Packed Waxy Corn,Double Packed Black Waxy Corn,Double Packed Purple Glutinous Corn Jilin Province Argricultural Sister-in-law Food Co., Ltd. , https://www.nongsaocorns.com
1. During the production process, the temperature of the bearing must be checked frequently. When the temperature rises above 50 °C, the water-cooled tube should be connected to cool the bearing. When the temperature rises to 90 °C, stop the inspection, find out the cause and troubleshoot.
2. When the new machine is running, the drive belt is easy to stretch. Pay attention to adjust the proper tightness of the belt to ensure the working life of the belt.
3. Consumable parts should be inspected frequently and replaced in time to ensure production quality and production volume.
4. For the blade, always check the wear and tear. If it is worn, the productivity will decrease, and the particle size will become thicker and it will be replaced after being worn.
5. The main engine rolling bearing is grease-lubricated with No. 2 white special grease penetration degree of 265-295 degrees.
6. The grease replacement period of the bearing is 2000 hours. The filling amount of the grease is two parts of the space inside the bearing cavity. Do not fill the grease excessively, otherwise the bearing temperature will be too high.
Wfj superfine pulverizer troubleshooting:
Exclusion method, electric power does not turn
1. The fuse is blown and the line is blocked.
2. Contactor contact is poor
1. Replace the fuse or change the wire
2. Grinding the contacts or replacing the noise
Bearing wear
2. Crushing spindle, cutter disc grading impeller unbalanced replacement bearing re-running balance test productivity drop granularity uneven liner pulverizing knife wear pipe blockage impeller being adhered to powder filter bag damage management leakage replacement fitting (ie wearing parts)
Large purge filter bag or repair sealed pipe route 