Snow bonsai in June Placement: June snow should be placed in a semi-yin and semi-yang area, warm and humid place. It must not be exposed to the sun during the summer and it must be put indoors during the winter. The temperature should not be lower than 2°C. June snow pile view landscaping room, can give people fresh and cool and comfortable. Watering: In the spring and summer growing season, it is necessary to maintain sufficient water in pots and soils, and when the high temperature is high in summer, leaf surface water will be poured to facilitate flowering. In the dormant period after autumn, care should be taken to prevent water in the basin, so as to avoid rot. Fertilization: June snow is more resistant to slimming, fertilization should not be too hard, otherwise it is easy to cause crazy growth, affecting the tree shape. Generally in the spring and autumn seasons, a thin fertilizer can be applied. Pruning: Pruning can be performed in April and October each year. Branches that grow too strong and branching branches that sprout at the root can be trimmed to achieve balance between the strength of each branch and maintain the beauty of the tree. At the same time, for dense branches, thinning must be carried out. The pruning in October should not be too heavy to prevent the re-emergence of autumn. In addition, the frequent picking of the heart in the summer can make the foliage luxuriant. Turning basins: The snow bonsai in June should be turned once every 2 to 3 years, mostly in the spring of March. When cutting the pot, pay attention to cut the withered root, and properly remove some of the old roots and old soil, replace the loose leaf and soil, which is conducive to the development of the root system. In addition, the rooting and rooting processes can be gradually carried out in combination with the pots. After turning over, it should be temporarily placed in a cool, ventilated place and returned to normal management after one week. Pest control: In June, there were locusts infested by snow, and 80% of dichlorvos could be used to spray 1200 times liquid. Principle
sandwich method and gold immunochromatography assay.
Main components LH Ovulation Rapid Test Kits,Medical Supplies Ovulation Rapid Test,Ovulation Urine Test Strips,LH Ovulation Luteinizing Hormone Rapid Test Kit Changchun ZYF science and technology CO.,LTD , https://www.zyf-medical.com
The test utilizes antibodies including a monoclonal LH-β antibody and goat anti-rat IgG on the
nitrocellulose membrane with colloidal gold marked anti-LH-α monoclonal antibody as an mark
tracer. The reagent is used to detect the LH in urine according to the principle of double antibody
The testing kit is in the form of strip, cassette, and midstream. Basic components: Sample pad,
colloidal gold marked pad, nitrocellulose membrane, absorbent paper and PVC board. Colloidal
gold marked pad coated with LH-α monoclonal antibody, nitrocellulose membrane coated with
LH-β monoclonal antibody,control line coated with goat anti-rat IgG.
Result Judgment
POSITIVE: Two distinct red lines appear. If the color of testing line is stronger than or equal to the
control line, it demonstrates that the ovulation is about to occur in the next 24 to 48 hours.
NEGATIVE: One red line appears in the control region(C). Or both red line appear with the color of
testing line is weaker than the control line, it demonstrates that the ovulation period does not
arrive yet.
INVALID: No red lines appear or control line fails to appear, indicating that the operator error or
reagent failure. Verify the test procedure and repeat the test with a new testing device.
