Feed testing is a relatively inexpensive way to confirm that the mixed product meets the requirements. Special attention should be paid to the ratio between the consumption of feed and the increase in animal weight to determine the input-output ratio and determine whether the performance is desirable. It is not always possible for fish farmers to buy the best mix of feeds. Sometimes it is necessary to mix and purchase various feed ingredients at a certain rate. This is why farmers need to understand some of the reasons for how to mix feed ingredients and mix them. Various feed ingredients need to be mixed together to achieve the desired nutritional combination. A typical example is the combination of high-energy feed ingredients (such as ground corn) and high-protein feed ingredients (usually soybean cake or cottonseed meal) to obtain a balanced energy and protein feed mixture. Feed mixing can be simple or complex. Simple mixing can be done at home farms, but complex mixing is usually done by commercial feed manufacturers. Feed Mix Tips: Start an effective recipe - study the effective mixing ratio before preparing the feed. Does the formulation meet the nutritional needs of the target animal? Is the raw material needed for the formulation economical? What is the cost budget? In most cases, it is best to start with feed trials. Then develop a most economical combination based on test results. This results in an economical and efficient mixed feed ratio. Add feed additives as indicated in the label - In the process of adding feed additives, the cost of mistakes is often expensive and dangerous. Adding a very small amount of feed additives can often achieve better nutritional effects than adding tens of kilograms of feed ingredients. The type and amount of surface additives must be on the surface or label of the feed package so that the feed is fed only to suitable animals. It must be kept in mind that some feed additives are beneficial to some special breeds of animals but are harmful to humans. Ingredient weighing - Bushels or some other volume calculation is unreliable compared to weighing. Mix thoroughly - follow the instructions to check the feed. Feed testing is a relatively inexpensive way to confirm that the mixed product meets the requirements. Special attention should be paid to the ratio between the consumption of feed and the increase in animal weight to determine the input-output ratio and determine whether the performance is desirable. JIANGSU CLS TECHNOLOGY CORP.LTD , https://www.js-cls.com