Rushan Jinguo Food Co., Ltd , https://www.jinguofood.cn
Second, the scope of application: for the post operation of efficient coating machine.
Third, the responsible person: production department management personnel, coating class squad leader, operating workers.
Fourth, the program:
1 Check whether the various parts of the machine are in good condition, clean and hygienic, and disinfect according to the “Efficient Coating Machine Disinfection Procedureâ€.
2 According to the shape of the coating pan and the shape of the medicine, install a rubber plate of appropriate thickness, and pay attention to the angle and number of the magnetic needle plate. Install and adjust the spray device to check whether the operation, pot, blower, spray and other devices can operate normally.
3 Set the required working time on the timer before starting the machine.
4 Adjust the flow rate of the infusion pump every minute, whether the pressure of the compressed air meets the requirements, the electric heating hot air temperature and the air supply volume, the angle of the spray gun is adjusted to the good state of the gun, and the center of the medicine is turned to the center of the medicine turning curve.
5 The position of the suction blade is adjusted to the top of the spray gun during the coating work. After the coating work is finished, adjust to the vertical upward position to avoid affecting the film.
6 After the operation is completed, turn off the air compressor, electric heating wire, air heater, motor, and film-coated switch.
7 In accordance with the "× × × high-efficiency coating machine cleaning procedures" to do a good job of the machine clean.
8 Maintain the equipment according to the “××× High-efficiency Coating Machine Maintenance Procedureâ€.
Introduction to efficient coating machine safety operation procedures
I. Purpose: To establish a safe operating procedure for an efficient coating machine to properly operate the machine to prevent accidents.