Step 1: Prepare the culture medium: the components are sawdust and wheat bran, and the mass ratio is about 3: 1. Generally, the broad-leaved wood chips are used. The harder the better, the stamina is sufficient. Sawdust such as poplars and willows is loose, not easy to compact, and has poor stamina. Sawdust of pine, cedar, camphor and cypress, and mildew hardwood sawdust are not suitable for use. If there is no wood chips, you can also use sugarcane dregs, cottonseed hulls or corn stalk dregs, etc. Weigh the wood chips and wheat bran in proportion and mix well, and many good formulas have been found in various places according to local conditions. use. ①Sawdust medium. 73 kg of wood chips, 25 kg of bran, 1 kg of sugar, 1 kg of gypsum, and 160 kg of water. ② Bagasse culture medium. Sugarcane bagasse 73 kg, bran 25 kg, stone white paste 1 kg, water 160 kg. ③ Sawdust bagasse culture medium. Sawdust 40 kg, bagasse 30 kg, bran 35 kg, sugar 1 kg, gypsum 1 kg, water 160 kg. The second step is to make seeds: put the prepared culture material into a jar or mushroom bottle, and pour the bottle a few times while bottling, so as to avoid gaps in the lower part of the bottle, resulting in uneven top and bottom, the appropriate amount is the distance from the bottle The mouth is 3 to 5 cm, flatten the upper surface, and then use a bamboo rod with a diameter of about one centimeter to pierce a hole in the center of the bottle from top to bottom, and rotate to exit the bamboo rod to prevent the upper material from being broken. The piercing hole is conducive to sterilization Spread thoroughly with mycelium, stopper cotton stopper plus moisture-proof paper, so that it can also be sterilized with two layers of kraft paper, requiring 1.2 kg pressure for one hour, seed vessel preparation: the wheat bran and water according to the mass ratio of 1: 2 Mix it, mix it evenly and put it in a culture vessel to flatten it slightly. About 10 grams of dry wheat bran can be filled with a 9 cm diameter culture dish. The medium should not be too thick when bottling, or reduce the amount of mixing water by 1: 1.5 is enough. Step 3: Inoculation: Under sterile conditions, use the inoculated needle to pick up the cultured mycelium with large soybean grains and place it in the wheat bran. Press and put it in an environment of about 26 ℃ for a week, and the white hyphae will basically grow up. Step 4 Cultivation: The cultivation of Ganoderma lucidum can be divided into two stages, it is best to set up two cultivation rooms. The first culture room only requires a temperature suitable for mycelial growth of 25 ° C to 28 ° C. The bottle should be placed upright, not horizontally, to prevent the bacteria from falling on the mouth of the bottle and not being connected to the culture medium to affect the germs. About 10 days later In addition to the mycelium extending five or six centimeters into the bottle, white pimple-shaped protrusions are cultivated in the bottle and the surface is formed, which is the seed entity primordium. At this time, the cover should be removed and sent to the second culture room. At this time, the bottle can be placed sideways. In addition to the appropriate temperature, the relative humidity of the air must not be lower than 70%, preferably 80% ~ 90% In addition, it also requires a certain amount of scattered light and proper ventilation to ensure sufficient oxygen supply, so that Ganoderma lucidum can be differentiated from Ganoderma lucidum normally. Ventilation should be carried out slowly, when the temperature is low, it should be at noon, to avoid the sudden change of temperature causing Ganoderma lucidum deformity. After this, it will basically cultivate for 45 days to 60 days, and the Ganoderma can be harvested. Disclaimer: Some articles of this website are transferred from the Internet. If the legal rights of third parties are involved, please inform this website for processing. phone Pemf therapy mat,Infrared pemf mat,Best infrared pemf mat Guangzhou Fuerle Health Technology Co., Ltd , https://www.fuerlegroup.com