When the fruit growers plant fruit trees, they will install micro-running tubes in the orchard. This is not only conducive to the simple purification of water, but also to prevent clogging. It is also suitable for all kinds of topography, soil and various fruit trees. So what are the precautions in the actual installation process? First, the mountain orchard micro-run tube should adopt the ring installation method At present, most of the mountain orchard micro-running tubes are erected or ring-mounted. Compared with the vertical installation method, the annular installation method is more suitable, mainly in the following points: 1. No mechanical drilling is required, and it is convenient to manually dig the annular groove, which is convenient and saves trouble. 2. There are few accessories installed in the emitter, only need to follow two accessories, and the installation is relatively simple. 3, backfill is simple, no need to prepare fine soil or sand. 4. Because the micro-running tube and the capillary tube form a loop, in the later use, it is only necessary to open the end of the capillary tube or the branch tube, and rinse the tube with water. 5. It can be dug into a sloping annular groove, which can meet the water absorption of crop roots at different depths. 6, there will be no gas barrier phenomenon, resulting in micro-running tube does not produce water. Second, reasonable setting of the control tank irrigation gap 1. The control tank irrigation height given by the micro-irrigation plant is 2m, that is, there should be a surge tank at almost 1-2 sets. According to this construction, the construction cost and cost will increase a lot. 2. In the installation and construction of the mountain orchard, adjust the height of the pressure control tank to within 5-6m, so as to avoid the uneven water discharge between the micro-running tube and the first and last stage. Third, improve the production method of the pressure regulating pool 1. Low cost, easy to install, fast and time saving. 2. There will be no water leakage at the bottom of the pool or the wall due to foundation subsidence or other reasons. 3. It should be noted that when made of metal iron drum, the inner wall of the barrel must be treated with anti-corrosion treatment. Fourth, the application method and concept of changing organic fertilizer 1. The organic fertilizer in the mountain orchard is generally applied by means of pits or strips, but it is also easy to damage the buried pipeline. 2. The micro-irrigation system can only apply liquid organic fertilizer such as biogas slurry, and can not use the biogas residue to increase the organic matter content of the soil. 3. If it is necessary to increase the organic fertilizer containing biogas residue, it is necessary to establish a fertilization system, and use the pumping equipment such as a water pump (pipe pump) or a self-pressing method to directly inject the fermented organic fertilizer into the root of the crop by fertilization, or This problem is solved by applying organic fertilizer by artificial watering. For the wonderful pictures and popular comments on the installation of the micro-run tube in the mountain orchard, you may be interested in the following recommended contents. Welcome to read. Squid Steak,Baked Calamari Steak,Calamari Steak,Calamari Steak Resepte Zhejiang Industrial Group Co., Ltd. , https://www.xingyeseafood.com
