Ice Cream Powder,Icecream Float Powder,Chocolate Ice Cream,Vanilla Ice Cream Powder KARAK , https://www.jskarak.com
[Properties and Uses of the Product] This product has the advantages of good palatability, herbivore-loving, and easy digestion and absorption. Compared with the original material, this product has improved protein content and other nutritional value.
[Production equipment] ammonia furnace, grinder, mixer, granulator.
[Process flow]
Conventional method of stalk stalks nutrients mixed granulation finished refined feed.
Ammonia furnace straw smashing furnace nitrogen heating heating stuffy furnace open furnace ventilation out of the library out of the library stirring feeding.
[Steps]
The conventional method will crush the adzuki bean stalks, add 0.5% salt powder, fully mix, spray the appropriate amount of clean water, stir well, granulate with the granulator, and obtain finished feed.
Ammonia furnace ammoxidation furnace refers to a special equipment for quickly ammoniating the straw by heating it with external energy in a closed insulated container. It is not limited by the weather and seasons. It can generally ensure 24h ammoxidation furnace, and can produce 200 to 250 furnaces per year. It can be used for annual applications of beef cattle and dairy cattle farms.
According to the quality of 5% of the adzuki bean straw, ammonium salt is dissolved in water and evenly sprayed on the straw. The moisture content of the material is 25% to 40%. If the humidity is not enough, the water should be added by spraying or soaking. Put the prepared straw on the skip, pay attention to stacking neatly when loading, do not stick out of the car at the left and right ends, and there should be no dripping phenomenon when loading the wet material. Packing material, compaction, high material to not touch the top of the furnace is appropriate. The freight car is gently pushed into the furnace. Be careful not to touch the electric parts with the straw to prevent it from catching fire. After the skip advances, the furnace door is closed and locked. Then turn on the circulation fan and electric heater in turn. The heating temperature is automatically controlled by the temperature controller. The temperature control range can be preset on the table at 85~90°C. Heating and continuous heating for 13~14h, turn off the power, and the oven 4 ~ 5h. After the furnace is completed, the furnace can be opened, natural ventilation for 1 to 2 hours, and then released. In order to use the furnace temperature, the furnace door should be closed immediately after the furnace is released. Protecting the eyes of livestock from damage by residual ammonia, and using aminated azure bean stalks that are processed on the same day to feed livestock, should be fed at least once a day. The effect of feeding is best during the storage period of 1 to 2 weeks. It will gradually reduce the amount of ammonia in the material and reduce its nutritional value.
[Precautions]
(1) Adzuki bean stalk feed contains a large amount of protein, and it should be carefully stored to prevent mildew.
(2) Ammonia furnace method can also be used liquid ammonia, injection of ammonia according to the dry weight of the material, the amount of ammonia to calculate the amount of 1%. Then in turn open the ammonia injection port, each mouth evenly injection of ammonia, before and after injection of ammonia should maintain the ammonia furnace seal, do not leak. When ammonia injection, do not heat at the same time to prevent fire and explosion. After injection of ammonia for 1 to 2 hours, ammonia is allowed to evaporate and dissolve in the moisture of the straw. The ammonia injection operation must strictly abide by the safety regulations. The operators should wear gas masks, bamboo shoots, and anti-acid and alkaline work clothes.
Adzuki bean stalk feed processing technology
[Preparation of raw materials] Take the current year's stalk, dried, crushed, sieved through 80 mesh, ammonium salt, and commercial salt.